
Finding the right kids belt size is important so the belt fits comfortably and works properly. Many people choose the wrong size, even though the correct fit can easily be determined in just a few simple steps.
In this guide, we’ll show you step by step how to measure the correct belt size for children — either directly on the body or using an existing belt.
The total belt length is measured from the buckle to the end of the belt. However, the position of the belt holes also matters. That’s why the term “belt size” is commonly used.

The belt size is measured from the buckle to the middle hole. If this measurement roughly matches the child’s waist or hip circumference, there will usually be two holes available for tightening or loosening the belt.
EANAGO kids belts include three extra holes on each side of the middle hole, allowing longer use as the child grows.
Tip: For the best fit, the belt should normally be fastened using the middle hole. This leaves enough flexibility if the waist size changes slightly.
19.5–23.5 inches
21.5 inches
27.5–29.5 inches
21.5–25.5 inches
23.5 inches
29.5–31.5 inches
23.5–27.5 inches
25.5 inches
31.5–33.5 inches
27.5–31.5 inches
29.5 inches
35.5–37.5 inches

If you don’t have a measuring tape, you can also use a ruler or yardstick:
The total belt length is usually around 6–8 inches longer, depending on the style of the belt.

For younger children aged approximately 3–10 years, kids belts with a belt size of 23.5 inches and a total length of 29.5 inches usually fit well.
Older children up to around 12 years old typically need a 25.5-inch belt size with a total length of 31.5 inches.
Elastic stretch kids belts from EANAGO fit both age groups well because the flexible material stretches comfortably. They can also be adjusted with a clip up to a total belt length of 33.5 inches.
Small errors can easily occur during measurement, resulting in an incorrect size.
Pay particular attention to:
❌ Measuring to the end of the belt instead of to the hole
❌ Measuring too loosely
❌ Incorrect positioning (e.g., waist instead of hips)
❌ Choosing the wrong hole (not the middle one)
How many holes should a belt have?
Most belts have five holes. EANAGO boys belts and girls belts include two additional holes so the belt can adapt as the child grows.
What should I do if the belt is too long?
This should not be a problem, as the child will certainly continue to grow. With adjustable belts, the length can be modified using a clip to ensure a proper fit.
How should a belt fit?
A belt fits optimally when fastened in the center hole.
Is the belt size the total length?
No, this is an important distinction; see the explanation above.
What should I do if I am between two sizes?
In that case, you should opt for the larger belt. The child is definitely growing.
Determining the correct belt length is simple:
With the right size, the belt fits comfortably and reliably fulfills its function.